help please

General discussion of PokerTracker 3.

Moderator: Moderators

help please

Postby ryand912 » Sat May 22, 2010 8:00 pm

how in the heck do you use PT3? i have no idea how to configure this. i have set to import to full tilt but i am not getting any info from it. everything is blank. any help would be appreciated.
ryand912
 
Posts: 1
Joined: Tue May 18, 2010 11:18 pm

Re: help please

Postby adamp » Sun May 23, 2010 1:02 am

This was all copied from poker tracker 3 user guides.Get to know them you will need to
There is pics to help if you go to the PT3 user guides http://www.pokertracker.com/products/PT3/docs/

PokerTracker 3 may not be automatically configured to import hand histories from Full Tilt. You will have to configure PokerTracker manually in order for PokerTracker to automatically import hand histories.

You will notice immediately if Full Tilt is configured to automatically import hand histories by looking at the Auto Import tab. A checkmark will appear in the Auto field beside Full Tilt as shown in the screenshot below.


Tip: If you do not see Full Tilt listed, check the Show Hidden Sites option.

As you can see in the above screenshot, there is a checkmark in the Auto field for Bet. If there is no checkmark in the Auto field, Full Tilt is not configured to automatically import hand histories.

There are several reasons why Full Tilt may not be configured to automatically import hand histories:
The Full Tilt client has not been configured to save hand histories to disk. Please see the section in this guide titled Configuring Hand Histories at Full Tilt.
You do not have the Full Tilt client installed on your computer. If you have hand histories with a Full Tilt but no longer have the client installed on your computer, you should use the Manual Import tab. Please see the section in this guide titled Manually Importing Hand Histories.

If Full Tilt is configured to save hand histories to your computer and the Auto field is not checked then please read the next section in this guide titled Configuring PokerTracker 3 for Full Tilt.
Configuring PokerTracker 3 for Full Tilt
PokerTracker 3 must be configured to know where Full Tilt is saving the hand histories on your local hard drive. To configure PokerTracker 3:
In PokerTracker 3, choose the Import -> Auto Import tab.
Select Full Tilt from the site list.
On the right-hand side, select the Full Tilt configuration tab.
If your hand history directory is not listed, click the Auto Detect button. This should add the correct folder to the Directories Configuration. If it does not, you can manually select the directory using the Add button.
If you wish for PokerTracker 3 to start importing hands from Full Tilt whenever you begin auto importing then check Automatically Start With Auto-Import option.
If you use the Auto Center option in your Full Tilt client (so that you are always placed in the same seat location at every table) then you must configure PokerTracker 3 with this setting as well. Under Client Options, check Auto Center.
If you are play Rush Poker then you should check Enable Rush HUD under Client Options.



Configuring Hand Histories at Full Tilt
You must configure the Full Tilt client to save hand histories to a designated directory on your hard drive. This is important so that PokerTracker 3 may grab hand histories for the database.

To configure your hand histories in Full Tilt, do the following:
From the Full Tilt lobby, click on Options -> Hand History...
Check Save My Hand Histories.
Please note the default location where Full Tilt is saving your hand histories under Current Location. (We recommend that you do not change the default location)
Make sure that the Hand History Language Selection is in English. If English is not selected then please change it to English as PokerTracker 3 currently only supports the English language.
Click OK to save the settings.
adamp
 
Posts: 19
Joined: Sat Mar 27, 2010 11:35 am

Re: help please

Postby kraada » Sun May 23, 2010 9:30 am

You can also click File --> Setup Wizard to re-run the setup wizard and make sure you have everything configured. There are built in help documents there so that you can make sure it's all set up properly.
kraada
Moderator
 
Posts: 54430
Joined: Wed Mar 05, 2008 2:32 am
Location: NY


Return to General [Read Only]

Who is online

Users browsing this forum: No registered users and 0 guests